Order Specs

Osborne Technologies has restored the original product records of the Rawhide Gear Division formerly belonging to the Chicago Rawhide Company. These records date back over 100 years and document most every specifications of each gear previously manufactured over the last century.

Unique Part Number: In most cases, if the original gear is still available, stamped on the side of the brass flange of the gear will be a unique 6-digit part number to identify the individual gear. If available, please reference that part number to our staff and hopefully we will be able to locate the detailed product records in our database.

In any event, the primary specifications required to engineer a gear are: number of teeth, pitch, outside diameter, overall face, finish bore, keyway, number of rivets & bolt circle, pressure angle and type of material.

Special requirements such as specified flange material, tapered bore, extra keyways, set screw, hubs, etc. are available upon request. Below is the typical form used internally at Osborne Technologies to document the product records for an individual gear. Please complete and submit the form below.

Optionally you can download a form and fill in information to fax or mail us by CLICKING HERE.

 
Your Name:
Your Email:
Company
Quantity
Ship Date
Teeth
Pitch
O.D. Rough
O.D. Finish
RHF
Rough Turn Face
OAF
Bore-Rough Turn
Finish Bore
Keyway
Across Bore
Rivets No. Size
Bolt Circle
Set Screw
Set Screw LOC
Taper Per Foot
Taper Bore LG SM.
Backlite W.T.
Press ANG.
Flanges
Size
Extra
Hub  
  O.D Hub Proj
Drilled Holes
Bolt Circle
Brass WGT.
R.H. WT.
   
Message:

Please fill in code
then click SUBMIT

 
 
©2010 Osbome Technologies
Mound Industrial     9301 Watson Industrial Park     St Louis, MO 63126 USA
Phone: 314-968-3991     Fax: 314-968-1240     Email: